Humming Refinish catalogue
Every product, with its sizes and pack quantities. Prices and stock are available to logged-in distributors only.
No results. Try a reference (e.g. 178) or a shorter word.
Refinish system
Clear coats, hardeners, thinners, primers and fillers formulated to work together.
Clear coats 1
Hardeners 1
Thinners 1
Primers 1
Body fillers 1
Masking and protection
Tapes, papers, films and covers to protect exactly what needs protecting, without leaving a mark.
Masking tapes 10
Ref. MSQ-101
General-purpose masking tape
The everyday crepe tape that sticks to almost anything and tears by hand.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-102
Orange washi masking tape 80 °C
Thin, precise washi tape for clean masking lines, up to 80 °C.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-103
Automotive masking tape 80 °C
Strong bodyshop masking tape that withstands 80 °C for 30 minutes.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-104
Light yellow automotive masking tape 80 °C
Light yellow bodyshop masking tape with good adhesion, rated to 80 °C.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-105
Coloured automotive masking tape
Coloured masking tape to mark out and organise your work areas.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-106
High-temperature washi masking tape 100 °C
Thin, clean-edged washi tape that withstands 100 °C for 60 minutes: ideal for blends and lines.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-107
Purple washi masking tape 100 °C
Low-tack purple washi tape for delicate surfaces, up to 100 °C.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-108
UV-resistant washi masking tape 100 °C
UV-resistant washi tape rated to 100 °C, for masking that needs to stay on.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-109
Brown automotive masking tape 90 °C
Tough brown bodyshop masking tape that withstands 90 °C for 30 minutes.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Ref. MSQ-110
High-temperature masking tape 120 °C
High-temperature crepe tape: holds for 60 minutes at 120 °C.
12 mm × 50 m18 mm × 50 m24 mm × 50 m36 mm × 50 m+1
Fine line vinyl tapes 1
Ref. MSQ-121
Vinyl fine line masking tape
Flexible vinyl tape that follows curves and gives sharp separation lines, with no residue.
3 mm × 33 m5 mm × 33 m6 mm × 33 m9 mm × 33 m
Kraft paper 2
Ref. MSQ-113
Kraft masking paper
Thin, easy-to-handle kraft paper, from everyday masking to the most complex parts.
225 mm × 200 m300 mm × 200 m450 mm × 200 m600 mm × 200 m+1
Ref. MSQ-115
Pre-taped kraft masking paper with washi tape
Kraft paper and washi tape already combined: faster masking, residue-free removal.
18 cm × 20 m30 cm × 20 m45 cm × 20 m60 cm × 20 m+1
White masking paper 1
Ref. MSQ-112
White masking paper
Lint-free, lightweight coated masking paper for fast, clean masking.
225 mm × 200 m300 mm × 200 m450 mm × 200 m600 mm × 200 m+1
Masking films 2
Ref. MSQ-111
Pre-taped masking film
Film and tape in one: mask large areas quickly and cleanly.
55 cm × 30 m110 cm × 30 m140 cm × 30 mMade to measure
Ref. MSQ-114
Full-vehicle masking film
Wide electrostatic film: one person can mask the whole vehicle.
3.8 m × 100 m4 m × 300 mMade to measure
Covers 1
Ref. MSQ-119
Plastic vehicle protection cover
The plastic cover that protects the bodywork from dust and the weather.
4 × 5 m4 × 7 m
Interior protection 3
Ref. MSQ-116
Disposable plastic seat cover
The disposable cover that protects seats while the car is in the workshop.
130 × 80 cm
Ref. MSQ-117
5-in-1 disposable interior protection kit
Seat, steering wheel, handbrake, gear lever and floor protected in a single kit.
5-piece kit
Ref. MSQ-118
Disposable paper floor mat
The disposable paper mat that keeps the customer's carpet clean.
50 × 38 cm
Aperture foam 1
Ref. MSQ-120
Aperture masking foam
The foam roll that keeps overspray out of door shuts, with no hard edge.
13 mm × 50 m
Abrasives and sanding
Discs, sheets, sponges, sanding blocks and interface pads, from rough sanding to finishing.
Paper discs 5
Ref. ABR-104
Aluminium oxide hook-and-loop paper disc
Fast-cutting, long-lasting disc, from P80 to P400.
5 in – P80 to P4006 in – P80 to P400
Ref. ABR-112
Dry sanding paper disc – standard grade
The all-round paper disc for preparation before painting, from rough sanding to finishing.
5 in – 6 holes6 in – 9 holes
Ref. ABR-113
Green dry sanding paper disc
A green paper disc with a very wide grit range, from P40 to P3000.
5 in – 6 holes6 in – 9 holes
Ref. ABR-114
Yellow dry sanding paper disc
The yellow paper disc for bodywork preparation, from P40 to P1000.
5 in – 6 holes6 in – 9 holes
Ref. ABR-119
Ceramic paper abrasive disc
The ceramic disc that cuts fast, lasts long and needs less pressure.
5 in6 in
Net discs 1
Ref. ABR-118
Ceramic mesh abrasive disc
The ceramic mesh disc: full extraction, fast cut and long life.
150 mm
Stripping and flap discs 2
Ref. ABR-120
Non-woven stripping disc
Stripping disc for removing paint and rust from metal, in 5 diameters.
100 mm115 mm125 mm150 mm+1
Ref. ABR-121
Zirconia flap disc
Zirconia flap disc for grinding, deburring and finishing, from P40 to P120 grit.
4 in4.5 in5 in6 in+1
Abrasive sheets 2
Ref. ABR-101
Silicon carbide wet & dry sheet P1500 / P2000
Very fine P1500 and P2000 grits for denibbing and finishing, wet or dry.
228 × 139 mm – P1500228 × 139 mm – P2000
Ref. ABR-122
Abrasive sheets 23 × 28 cm
Standard-size abrasive sheets, from P60 to P2000, for sanding in vehicle repair.
23 × 28 cm
Strips and rolls 2
Ref. ABR-115
Foam-backed flexible abrasive roll
The flexible abrasive roll that follows contours and gets into hard-to-reach areas.
114 mm × 25 m
Ref. ABR-117
Ceramic mesh abrasive – strip
Fast-cutting ceramic mesh abrasive for dust-free, clog-free sanding.
70 × 198 mm70 × 400 mm
Non-woven pads 2
Ref. ABR-102
Charcoal grey ultra-fine non-woven abrasive pad
Ultra-fine non-woven pad for keying before painting, without the drawbacks of steel wool.
6 × 9 in
Ref. ABR-103
Red very fine non-woven abrasive pad
The all-round red pad for keying and preparing before painting.
6 × 9 in
Abrasive sponges 1
Ref. ABR-116
Flexible abrasive sponge
The soft abrasive sponge for even hand sanding on curves and rounded shapes.
120 × 98 × 13 mm
Sanding blocks 6
Ref. ABR-105
Hook-and-loop hand sanding block
A flexible, comfortable block for even sanding of primers and curved panels.
66 × 122 mm70 × 198 mm67 × 400 mm
Ref. ABR-106
Mouse sanding block for discs
Round block with angled sides for hand sanding with your 5 or 6 in discs.
5 in6 in
Ref. ABR-107
Dust-extraction hand sanding block
Connect your extractor to the block: clean, dust-free hand sanding.
125 × 70 mm200 × 70 mm400 × 70 mm230 × 115 mm
Ref. ABR-108
Foam and plastic sanding block
Light block that keeps its shape, for wet or dry sanding, washable and reusable.
Short 13.5 × 7 × 3 cm – greenLong 22.5 × 7 × 3 cm – greenShort 13.5 × 7 × 3 cm – whiteLong 22.5 × 7 × 3 cm – white
Ref. ABR-109
Foam and aluminium sanding block
Rigid aluminium-based block that keeps its shape, for flat wet or dry sanding.
Short 13.5 × 7 × 3 cmLong 22.5 × 7 × 3 cm
Ref. ABR-110
Rubber sanding block
Firm, ergonomic rubber block for wet or dry hand sanding.
12.5 × 6.7 × 3 cm
Interface pads 1
Ref. ABR-111
Soft hook-and-loop interface pad for sanders
Perforated interface pad that protects the backing pad and follows curves, in 5 or 6 in.
5 in6 in
Preparation and cleaning
Tack cloths and wipes for a perfectly clean surface.
Tack cloths 4
Ref. PRE-101
Cotton gauze tack cloth
The last step before painting: a surface free of dust and smears.
38 × 80 cm45 × 90 cm
Ref. PRE-102
Non-woven tack cloth
Lint-free non-woven tack cloth, in three sizes.
40 × 70 cm35 × 40 cm25 × 30 cm
Ref. PRE-103
Cotton gauze tack cloth, individually wrapped
Cotton gauze tack cloth, ready to use in an individual pouch.
36 × 80 cm
Ref. PRE-104
Embossed cotton gauze tack cloth
Large embossed tack cloth, ideal before primer and basecoat.
80 × 90 cm80 × 110 cm
Wiping and degreasing 3
Ref. PRE-105
Solvent-resistant meltblown non-woven wipe – box
The lint-free, solvent-resistant wipe, dispensed one sheet at a time.
30 × 35 cm
Ref. PRE-106
Solvent-resistant meltblown non-woven wipe – roll
Roll of 717 lint-free, solvent-resistant wipes for the paint shop.
24 × 34 cm × 717 sheets
Ref. PRE-108
Absorbent cotton roll
Absorbent 100% cotton for cleaning, wiping off residue and applying solvents and cleaners.
350 g roll
Sprayers 1
Ref. PRE-107
1 L hand pump sprayer
1 L pump sprayer with Viton seal, for degreasers and solvent-based cleaners.
1 L
Mixing and application
Cups, spray gun pots, strainers, spray guns and colour tools for accurate measuring and application.
Spray guns 4
Ref. MEL-109
HVLP gravity-feed spray gun – 1.3 mm nozzle
A light, easy-handling HVLP spray gun with a 1.3 mm nozzle for an even spray.
1.3 mm nozzle
Ref. MEL-110
Gravity-feed 1.4 mm / suction-feed 1.7 mm spray gun
Two versions to choose from: gravity feed with 1.4 mm nozzle or suction feed with 1.7 mm nozzle.
Gravity feed – 1.4 mm nozzleSuction feed – 1.7 mm nozzle
Ref. MEL-111
HVLP gravity-feed or suction-feed spray gun
Lightweight gravity-feed or suction-feed spray gun, for a spray that is easy to control.
GravitySuction feed – 1.7 mm nozzle
Ref. MEL-112
Underbody coating / sandblasting gun
The air gun for underbody coatings, sandblasting and blowing off.
21.5 × 13 cm
Disposable cups 2
Ref. MEL-107
Disposable spray gun cup system
Disposable cup with soft liner: less cleaning, more time in the booth.
400 ml600 ml800 ml
Ref. MEL-108
Metal adaptor for disposable cup
Fit the disposable cup to your spray gun with the right threaded adaptor.
A1 – M14A2 – M16A3 – Quick-release connectorA4 – M16
Paint strainers 3
Ref. MEL-101
Paper paint strainer
Paper strainer with nylon mesh: clean paint, no wasted product.
120 g paper, 190 µm mesh120 g paper, 125 µm mesh150 g paper, 190 µm mesh150 g paper, 125 µm mesh+4
Ref. MEL-102
Paper paint strainer for waterborne paints
Coated paper strainer, designed specifically for waterborne paints.
200 g paper, 125 µm mesh
Ref. MEL-113
Filter for gravity-feed spray guns
The in-gun filter for contaminant-free paint.
11 × 36 mm – 125 µm
Mixing cups and tins 3
Ref. MEL-105
Paint pot with lid
The economical pot for storing and delivering your mixed colours, from 0.2 to 2 L.
0.2 L0.3 L0.5 L1 L+1
Ref. MEL-106
Clear graduated mixing cup
Clear graduated cups for accurate measuring of paints and clear coats.
400 ml500 ml680 ml1 L+2
Ref. MEL-114
Mixing lid for paint tins
Stirrer lid that clips quickly onto the tin, for solvent-borne and waterborne paints.
4 L tin1 L tin
Measuring and mixing 3
Ref. MEL-103
Aluminium paint mixing ruler
One ruler, two mixing ratios: measure your paints and clear coats quickly and accurately.
350 × 30 × 2 mm
Ref. MEL-104
Bamboo stirring stick
Bamboo sticks for mixing paints and products, or applying filler and wax.
1.8 × 30 cm
Ref. MEL-115
7.5 kg electronic paint mixing scale
Stainless steel digital scale with tare, hold and timer for weighing your colours in the mixing room.
7.5 kg
Colour and touch-up 4
Ref. MEL-116
Metal colour check cards
Chequered metal cards for checking colour, hiding power and effect before painting the vehicle.
148 × 105 mm148 × 105 mm
Ref. MEL-117
Touch-up bottles with brush
Graduated bottles with brush cap for supplying and applying touch-up paint.
30 ml (1 oz) – 4 × 5.2 cm60 ml (2 oz) – 4 × 7.6 cm
Ref. MEL-118
Refillable 2-in-1 touch-up pen
Brush at one end, fine tip at the other: accurate touch-up of chips and scratches.
20 ml
Ref. MEL-119
Car-shaped colour display model
Plastic car body silhouette for viewing colours and effects as they would look on a real vehicle.
20 × 10.8 × 4 cm
Polishing and buffing
Foam pads, wool pads, microfibres and decontamination for a mirror-like gloss.
Polishing foams 6
Ref. POL-101
150 mm polishing foam – standard range
Washable polishing foam, gentle on paint, with M14 or M16 fitting.
150 × 45 mm – M14150 × 45 mm – M16
Ref. POL-102
150 mm polishing foam – premium range
Washable premium polishing foam, M14 or M16 fitting.
150 × 45 mm – M14150 × 45 mm – M16
Ref. POL-103
150 mm polishing foam – professional range
Our top-of-the-range polishing foam for a clean, glossy finish.
6 in – M146 in – M16
Ref. POL-106
White waffle buffing foam – heavy cut
Waffle foam that holds the compound to remove sanding marks and holograms.
8 in
Ref. POL-107
Black waffle finishing foam – soft cut
Black finishing foam for removing holograms and micro-defects.
8 in
Ref. POL-110
Concave polishing foam
Four concave foams, from cutting to a high-gloss finish.
230 × 38 mm
Wool pads 2
Ref. POL-104
Single-sided hook-and-loop wool buffing pad
8-inch 100% wool pad for compounding paints and composites.
8 in
Ref. POL-105
Double-sided screw-on wool buffing pad
8-inch double-sided wool pad: two working faces, one screw-on fitting.
8 in
Decontamination 2
Ref. POL-108
Decontamination clay bar
The clay bar that leaves paint perfectly smooth before polishing.
8 × 5.5 × 2 cm10.2 × 7 × 3.3 cm
Ref. POL-111
Decontamination clay towel
The towel that decontaminates paint twice as fast as a conventional clay bar.
30 × 30 cm – grey30 × 30 cm – blue30 × 30 cm – red
Microfibres and backing plates 2
Ref. POL-109
Washing and drying microfibre cloth
A thick, highly absorbent microfibre cloth that is gentle on paint.
25 × 50 cm30 × 40 cm30 × 60 cm30 × 70 cm+6
Ref. POL-112
Backing plate for rotary polisher
The M14 polisher backing plate, in 5, 6 or 7 inches.
5 in – M146 in – M147 in – M14
Protective equipment
Gloves, masks and overalls for working safely.
Ref. EPI-101
Disposable hooded anti-static overalls
Low-linting, abrasion-resistant painter's overalls that protect against dust and aerosols.
SMLXL+2
Ref. EPI-102
Reusable silicone half-mask respirator
Silicone half mask with exhalation valve, supplied complete with cartridges and pre-filters.
M (complete kit)
Ref. EPI-103
Powder-free disposable nitrile gloves
Powder-free, tear-resistant disposable gloves that keep your sense of touch and dexterity.
SMLXL
Workshop accessories
Spreaders, holders, knives and everyday small equipment.
Gun holders 3
Ref. ACC-101
Spray gun and paint strainer holder
Steel holder that keeps the gravity-feed gun and strainer in place while filling.
22 × 7.5 × 40.5 cm
Ref. ACC-102
Magnetic spray gun holder
Rest your spray gun safely anywhere on a metal surface.
83 × 125 mm
Ref. ACC-114
Metal spray gun keyring
Mini zinc alloy spray gun: the ideal customer gift for bodyshop professionals.
8.5 × 4.2 cm
Spreaders and knives 5
Ref. ACC-106
Plastic filler spreader
Flexible spreaders for applying body filler and resin quickly and cleanly.
4 in5 in6 inSet of 3 sizes
Ref. ACC-107
Multi-purpose rubber squeegee
Flexible rubber squeegee for smoothing filler and wiping off sanding slurry.
10.5 × 7.3 cm
Ref. ACC-108
Trapezoid rubber squeegee
Trapezoid shape, two sizes: the rubber squeegee for larger areas.
Small – 9.5 × 7.5 cmLarge – 11.5 × 7.9 cm
Ref. ACC-109
Set of 4 stainless steel filler knives
4 stainless steel knives from 50 to 120 mm with plastic handles: the essentials for applying filler.
Set 50 / 80 / 100 / 120 mm
Ref. ACC-113
Stainless steel filling knife
Hardened, flexible, rust-resistant stainless steel blade for applying and smoothing filler.
4 in6 in8 in10 in
Masking tools 2
Ref. ACC-103
Dispenser for pre-taped masking film
Dispenser with cutter for unrolling and cleanly cutting pre-taped film.
Small model: 10 × 8 cmLarge model: 20 × 8 cm
Ref. ACC-104
Magnetic masking film cutter
Cut film on the vehicle without ever scratching the paint.
7.5 × 4.5 cm
Cleaning 4
Ref. ACC-111
Non-woven wiping cloth – dispenser box
The tough non-woven cloth that's a better choice than textile rags.
25 × 35 cm
Ref. ACC-112
Non-woven wiping cloth – roll
Non-woven wipes on a 500-sheet roll, absorbent and strong when wet.
25 × 30 cm × 500 sheets
Ref. ACC-118
Hand cleaning paste
Workshop paste for removing paint and stubborn dirt from hands, in a 350 g tube.
350 g
Ref. ACC-119
23-piece spray gun cleaning kit
Brushes, needles and lubricant in a case for complete spray gun maintenance.
23-piece case
Small workshop tools 6
Ref. ACC-105
Metal tin opener
Galvanised steel tin opener, tough and compact, always in your pocket.
11.2 × 3.7 cm
Ref. ACC-110
Hook-and-loop sanding pad
Replacement hook-and-loop pad for most air sanders.
5 in – 6 holes6 in – 6 holes
Ref. ACC-115
Seam sealer brush
Stiff nylon-bristle brush for applying seam sealers and underbody protection.
25 mm30 mm
Ref. ACC-116
Eraser wheel for adhesives and decals
Rubber eraser wheel for removing decals, pinstripes and glue residue without damaging the clear coat.
3.5 in4 in
Ref. ACC-117
Acrylic double-sided tape
High-tack clear acrylic double-sided tape, waterproof and weather-resistant.
10 mm × 10 m10 mm × 33 m
Ref. ACC-120
Body clip and fastener assortment case
680 universal clips and removal tools in a case: always the right clip to hand.
680 clips + 45 pieces
Humming is sold through your distributor.
You'll find every specification on this site. To buy, go to a Humming distributor near you.